Products Overview£º
Features
• Load Cell driven system provides precise control of test force application
• Direct digital reading
• Engineered to obtain highly sensitive and accurate readings
• Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
• Measuring Range: 8-650HBW
Specifications :
• The whole weight of the tester is 50% less than the traditional dead weights type tester.
• Test load selection by keyboard and LCD screen.
• Fully automatic test cycles. The Brinell hardness Tester features a fully automatic test cycle, load application, holding,
unloading, is performed fully automatically. This greatly improves reproducibility of test results since operator influence is
eliminated.
• Selectable dwell times by screen. The indenter, load, and other test information are shown clearly on the large LCD screen.
• Equipped with a 20X optical microscope to measure the diameter of Brinell indention.
• Brinell Hardness Calculator (BHC) make the hardness value calculation easier and convenient.
• Max measurable height: 430 mm
• Max measurable depth: 200 mm
• Dimensions: 600mm¡Á300mm¡Á1000mm
• Power supply: 220/110 V, 50/60 Hz, 4A
• Weight: 160kg
• Standard blocks: 125-350HBW10/3000,
125-350HBW10/1000
Technical data :
• Loads£º3000kgf (29400N), 1500Kgf (14700N), 1000Kgf
(9800N), 750Kgf(7355N),500Kgf (4900N),250Kgf (2452N),
187.5Kgf (1839N), 125Kgf (1226N),100Kgf (980N),
62.5Kgf(612.9N)
• Load dwell duration: 2s¡«99s, can be set and stored
• Tungsten Carbide Ball indenter: 10mm, 5mm, 2.5mm
• Measuring range: 8-650HBW
• Magnification of the microscope: 20X
• Resolution capability of the microscope: 0.01mm
|
