Products Overview：

State of the art,digital tester is capable of reading Wall thickness thru coatings and paint without affecting the measurement and is packed with the most popular features including basic measurement, Scanning Capabilities, Adjustable Sound Velocity, and extended  memory. This dynamic sonic gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The T-3000 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.

T-3000  comes complete with Certificate of Calibration, Couplant Gel, Operation Manual and Custom Carry Case.

Technical Specifications :

Display type：4-digit LCD w/ Back light
Minimum display unit：0.003”(0.0762mm)(if>3.93”(99.822mm), 0.0003”(0.00762mm)(if<3.93"(99.822mm)
Measuring Range：Standard Mode:0.03”-8.0”(0.762mm-200mm)in steel
                              Thru Coating Mode:0.118”-.905” 
                              (3.0-23)mm  w/ standard probe
Accuracy：+/-1%xH+0.0007”(0.018mm), (H=displayed value)
Sound velocity range：3280-32805 ft/s(1000-9999m/s)
Upper/Lower Limit Preset Alarm：Yes
Operating temperature：32-122 degrees F (0-50 degrees C)
Frequency：4MHz
Update range：4MHz
Memory：500 Test Values
Power supply：3V AA alkaline batteries (2pc)
Battery Life：Approx. 100 hours (w/backlight off)
Power consumption：Working current is less than 3V
Dimensions：5.86” x 2.87” x 1.25” (149 x 73 x 32mm)
Weight：5.6oz (160g)